প্রযুক্তিগত গাইড

Time to First Token and Latency Metrics

Time to first token (TTFT) measures delay until the first generated token, while inter-token latency (ITL) measures gaps between generated tokens and throughput measures output volume over time.

এই নির্দেশিকা শুনুনএআই-বর্ণিত · ~3 min

এই পৃষ্ঠায়3 মিনিট পড়া হয়েছে
  1. ওভারভিউ
  2. গভীর ডুব
  3. বাস্তব-বিশ্ব বাস্তবায়ন
  4. The Future of Time to First Token and Latency Metrics
  5. এটাকে বাস্তবে প্রয়োগ করা হচ্ছে
  6. অন্বেষণ চালিয়ে যান
  7. প্রায়শই জিজ্ঞাসিত প্রশ্নাবলী

ওভারভিউ

Tail percentiles such as p95 and p99 show slow-request behavior, but metric definitions and user experience targets depend on the serving stack and workload.

গভীর ডুব

A streamed language-model response has several timing components. Time to first token (TTFT) measures how long a request waits before the first output token arrives. Inter-token latency (ITL), sometimes reported as time per output token, describes the gaps during generation. End-to-end latency includes the full request through the final output; throughput describes how many requests or tokens a system handles over time. These metrics help distinguish different problems. Long TTFT can reflect queueing, network delay, long prompts, or prompt processing. High ITL can reflect decode speed, model size, or contention. Aggregate throughput may rise under batching even while an individual request waits longer. A fast average can hide slow tail requests, so teams often inspect p50, p95, and p99 along with error rates and token counts. Definitions need care. Some tools report time-per-output-token (TPOT), computed from end-to-end latency and TTFT; others report token intervals directly. The vLLM benchmark documentation defines its metrics and advises users to evaluate in serving conditions. Compare measurements only when workload, streaming mode, prompt lengths, output lengths, concurrency, hardware, and network conditions are comparable. No one metric establishes that a product feels fast. A typing assistant may need low first-token delay; a long research report may tolerate slower initial output if its final answer is good. Set user-centered service objectives, sample real requests, and monitor distributions over time rather than optimizing one average in isolation.

বাস্তব-বিশ্ব বাস্তবায়ন

A team tracks p95 TTFT to see whether a chat interface starts responding promptly under peak load.

An engineer compares ITL across model configurations using identical prompt and output lengths.

A service reports aggregate tokens per second separately from each user’s response time.

একটি বেঞ্চমার্ক p99 লেটেন্সি এবং অনুরোধ ব্যর্থতা রেকর্ড করে, শুধুমাত্র গড় রিপোর্ট না করে।

The Future of Time to First Token and Latency Metrics

Serving stacks may provide richer tracing that separates queue, prefill, decode, and network delays. Better telemetry can help teams meet different interaction targets without overprovisioning every workload. Comparisons will remain meaningful only when workloads and metric definitions are disclosed. Future dashboards should connect tail latency to user tasks and quality outcomes, and show uncertainty and failure rates alongside speed. Shared benchmark formats may improve repeatability across providers, while real-user monitoring will remain essential during traffic peaks and deployments at launch.

এটাকে বাস্তবে প্রয়োগ করা হচ্ছে

কেন এটা গুরুত্বপূর্ণ

  • খরচ ও বাজেট. আর্কিটেকচারের সিদ্ধান্তগুলি বছরের পর বছর ধরে কর্মক্ষমতা এবং অপারেটিং খরচ চালায়।
  • সুস্পষ্ট সিদ্ধান্ত. কারিগরি শিক্ষা দলগুলোকে সঠিক স্ট্যাক বেছে নিতে সাহায্য করে, শুধু নতুনটি নয়।
  • মান নিয়ন্ত্রণ. ভালো ইঞ্জিনিয়ারিং পছন্দ উৎপাদনে নির্ভরযোগ্যতার ঘটনা কমিয়ে দেয়।

জন্য সতর্ক

  • একটি বেঞ্চমার্ক অপ্টিমাইজ করা বৃহত্তর সিস্টেম দুর্বলতা আড়াল করতে পারে।
  • অবকাঠামো এবং রক্ষণাবেক্ষণের খরচ প্রায়ই অবমূল্যায়ন করা হয়।
  • সিস্টেমগুলি আরও জটিল হওয়ার সাথে সাথে সুরক্ষা এবং পর্যবেক্ষণযোগ্যতার ফাঁক বাড়তে পারে।

পরবর্তী পদক্ষেপ

  1. বাস্তবায়নের আগে বিলম্ব, গুণমান এবং খরচের লক্ষ্য নির্ধারণ করুন।
  2. বাস্তবসম্মত লোড এবং ডেটা অবস্থার অধীনে বেঞ্চমার্ক।
  3. ত্রুটি, প্রবাহ, এবং ব্যবহারকারীর প্রভাবের জন্য যন্ত্র পর্যবেক্ষণ।
  4. স্কেল করার আগে রোলব্যাক এবং ঘটনার প্রতিক্রিয়া পাথ প্রস্তুত করুন।

অন্বেষণ চালিয়ে যান

ফ্রি নিউজলেটার

প্রতিদিনের এআই ব্রিফিং পান

প্রতি সপ্তাহের কাজের দিন সকালে তিনটি যাচাইকৃত এআই স্টোরি, সহজ ইংরেজিতে লেখা। চিরকালের জন্য ফ্রি, কোনো বিজ্ঞাপন নেই।

প্রতি সপ্তাহের কাজের দিনে একটি ইমেল। এক ক্লিকেই আনসাবস্ক্রাইব করুন। আমরা কখনোই আপনার ঠিকানা বিক্রি বা শেয়ার করি না।

নিজেকে পরীক্ষা করুন

Take the Time to First Token and Latency Metrics quiz

প্রতিটি উত্তরের তাৎক্ষণিক ফিডব্যাক, এবং কোর্স পাস করার পর যাচাইযোগ্য আইডি সহ একটি শেয়ারযোগ্য সার্টিফিকেট।

কুইজ শুরু করুন

ফ্রি এআই শিক্ষাকে সমর্থন করুন। AI Understanding একটি 501(c)(3) অলাভজনক প্রতিষ্ঠান — কোনো বিজ্ঞাপন নেই, কোনো পেওয়াল নেই, কখনোই না। একটি দান করুন

প্রায়শই জিজ্ঞাসিত প্রশ্নাবলী

What is Time to First Token and Latency Metrics?

Time to first token (TTFT) measures delay until the first generated token, while inter-token latency (ITL) measures gaps between generated tokens and throughput measures output volume over time. Tail percentiles such as p95 and p99 show slow-request behavior, but metric definitions and user experience targets depend on the serving stack and workload.

How does aggregate throughput differ from per-request latency?

A service can raise total tokens per second while individual requests wait longer.

Why inspect p95 or p99 latency in addition to the average?

Tail metrics describe high-latency portions of the request distribution.

Why must benchmark comparisons use similar prompts, output lengths, and load?

Workload characteristics affect measured serving performance.

শিখতে থাকুন

সম্পর্কিত গাইড

এই বিষয়ের জন্য বাছাই করা আরও গাইড

একটি বিনামূল্যে AI শংসাপত্র পানএকটি সংক্ষিপ্ত বিনামূল্যে কোর্স এবং পরীক্ষা. কোনো খরচ নেই, কোনো কার্ড নেই। প্রায় 2.5 ঘন্টা।বিনামূল্যে শুরু করুন →