แบบทดสอบที่เชื่อมโยงกับคำแนะนำ · ปานกลาง ระดับ

แบบทดสอบการลบสเปกตรัมและการกรอง Wiener

ตรวจสอบว่าการลบสเปกตรัมและการกรอง Wiener ประมาณการสัญญาณรบกวน ประมวลผลสเปกตรัม STFT และการบิดเบือนสัญญาณทางการค้าเทียบกับสัญญาณรบกวนที่ตกค้างได้อย่างไร

เส้นทางแนะนำที่เกี่ยวข้องการลบสเปกตรัมและการกรอง Wiener
คำถาม 1 ของ 8

สิ่งประดิษฐ์ที่น่ารำคาญใดที่มักเกี่ยวข้องกับการลบสเปกตรัม

ดูตัวอย่างทุกคำถาม8 คำถาม

คำตอบและคำอธิบายจะปรากฏขึ้นเมื่อคุณทำแบบทดสอบ

  1. สิ่งประดิษฐ์ที่น่ารำคาญใดที่มักเกี่ยวข้องกับการลบสเปกตรัม
    • เสียงดนตรี (เสียงสุ่มหายวับไป)
    • การยกเลิกเสียงสะท้อน
    • การทำให้เป็นมาตรฐานของระดับเสียง
    • การเปลี่ยนระดับเสียง
  2. การลบสเปกตรัมและการกรอง Wiener ทำงานหลักในโดเมนใด
    • โดเมนเวลาดิบเท่านั้น
    • โดเมนความถี่หลัง STFT
    • โดเมนข้อความ
    • โดเมนรูปภาพ
  3. Under a specified statistical signal-and-noise model, what criterion does the classical Wiener estimator minimize?
    • The number of STFT frames
    • The file’s bit rate
    • Expected mean-squared estimation error
    • The number of microphones
  4. โดยทั่วไปการลบสเปกตรัมจะประมาณสเปกตรัมเสียงรบกวนได้อย่างไร
    • จากเครื่องกำเนิดตัวเลขสุ่ม
    • จากการถอดเสียงข้อความ
    • จากส่วนที่ดังที่สุดของสัญญาณ
    • จากส่วนของเสียงที่เงียบหรือไร้เสียงพูด
  5. In the common power-spectrum Wiener gain G=Ps/(Ps+Pn), what do Ps and Pn denote?
    • Estimated clean-signal and noise powers in that frequency bin
    • Speech and noise sample counts
    • Two different phase angles
    • The number of filters and frames
  6. ข้อสันนิษฐานหลักใดที่จำกัดทั้งสองวิธีในการป้องกันเสียงกะทันหันเช่นเสียงปิดประตู
    • คำพูดนั้นดังอยู่เสมอ
    • ว่าเสียงค่อนข้างนิ่ง
    • ว่ามีผู้พูดเพียงคนเดียว
    • ว่าเสียงเป็นแบบสเตอริโอ
  7. What may happen to the estimated magnitude in a spectral-subtraction bin when the noise estimate exceeds the observation?
    • It is wrapped into a positive phase
    • It is replaced by a transcript token
    • The negative result is floored to zero
    • It is doubled to preserve loudness
  8. When a real-valued Wiener gain is applied to a complex noisy STFT coefficient, what is commonly done with its phase?
    • Phase is replaced by the text prompt
    • Phase is always set to zero
    • The coefficient is converted into a stereo channel
    • The noisy phase is retained while the magnitude is scaled