Quay lại Tin tức
sản phẩmAI Understanding tóm tắt

DJI công bố robot hút bụi ROMO 2 với khả năng làm sạch AI và cánh tay robot

EFTM báo cáo rằng robot hút bụi ROMO 2 của DJI bổ sung tính năng phát hiện tình trạng lộn xộn dựa trên AI, lau nhà theo hướng dẫn LiDAR và chế độ dữ liệu cục bộ. Đơn đặt hàng trước dự kiến ​​bắt đầu vào ngày 9 tháng 9, với mức giá được báo cáo là 2.899 USD.

4 min readRead the linked source
Source-provided image accompanying DJI announces ROMO 2 robot vacuum with AI cleaning and robotic arm
Nguồn tham khảoNguồn đã ghi
Nhà xuất bản
eftm.com
Liên kết nguồn
eftm.comhttps://eftm.com/2026/09/dji-announces-second-generation-ai-powered-romo-2-robot-vaccum-with-lidar-guided-robot-arm-280396
Loại nguồn
Nguồn được liên kết - trạng thái nguồn chính chưa được thiết lập.
Bối cảnhHiểu điều này trong 60 giây

Bắt đầu ở đây

Thuật ngữ chính

tính năng
Một biến đầu vào được mô hình sử dụng để đưa ra dự đoán.
Tự kiểm traAI là gì? Câu đố

Chuyện gì đã xảy ra

EFTM reports that DJI announced the ROMO 2 at IFA as a second-generation AI-powered robot vacuum. The product is reported to use cameras, AI-based object avoidance and path planning, LiDAR and a robotic arm to identify messes and clean around furniture. DJI also plans a local data mode intended to prevent the DJI Home app from syncing photos or videos with external servers.

EFTM reports that DJI announced ROMO 2 at IFA as the successor to the original ROMO vacuum robots announced earlier in 2026. According to the report, the new model uses AI-based object avoidance and path building to navigate homes and cross thresholds up to 8.5 centimetres. The article describes AI as central to detecting, analysing and selecting cleaning approaches for different spills and messes.

The reported hardware includes a pressure plate that lowers during vacuuming to create a semi-seal against the floor, 36,000 Pa of suction power and dual tangle-free side brushes. EFTM also reports that ROMO 2 includes a LiDAR-guided robotic arm with a mopping pad. The arm is described as extending 7.8 centimetres beyond the usual path and reaching beneath furniture as low as 4.5 centimetres. The report says LiDAR is intended to let the device move close to walls and furniture without contact.

EFTM reports that onboard cameras and a ground-level LED light help the system identify dust and debris, distinguish liquid spills from other debris, and differentiate glass from mirrors. The product is also reported to include a self-cleaning base station, 55W fast charging that fills the battery in two and a half hours, and a claimed 365 days of maintenance-free operation. Those performance and maintenance claims come from DJI as reported by EFTM and are not independently confirmed here.

The reported price is $2,899, although EFTM does not specify the currency in the supplied article. Preorders are scheduled through DJI’s online store and authorised retail partners from September 9 to September 30, with a reported $500 early-bird discount. The source does not establish broader retail availability, shipping dates or which markets will receive the product.

Chi tiết nguồn: eftm.com ↗

Tại sao nó quan trọng

The reported launch shows AI moving beyond navigation into task-specific perception and physical action in a consumer appliance. If the described capabilities work reliably, users could receive more targeted cleaning of spills and debris, including in difficult spaces. The privacy controls are also relevant because the system uses cameras and microphones inside homes. However, EFTM’s report is not independently confirmed here, and it does not provide independent testing of cleaning performance, object recognition or privacy protections.

The ROMO 2 is notable because the reported AI functions are tied directly to physical decisions: recognizing the type of mess, planning a response and directing a vacuum and mopping arm. That could make an autonomous cleaner more useful in homes with mixed debris and hard-to-reach areas, but the source supplies no independent demonstrations, test results or error rates.

The product also illustrates a practical privacy trade-off. Cameras and microphones can support navigation and mess recognition, while the planned Local Data Mode is reported to disconnect the DJI Home app from the internet and prevent what DJI calls unintentional syncing of photos or videos with external servers. The report says users can disable the camera and microphone, but it does not explain data retention, encryption, offline limits or whether the mode is available at launch.

Interactive Mechanism

Cơ chế tương tác: Nó thực sự hoạt động như thế nào

Khám phá công nghệ cơ bản đằng sau sự phát triển này một cách tương tác.

Agent Lifecycle Stage:
1
User Intent & Planning: "Audit customer refund request #4092 and settle payment."
2
Tool Calling: Emits structured JSON call crm_get_transaction(id='4092').
3
Guardrail & Verification:🛡️ Paused: High-value action requires human operator sign-off.
4
Final Settlement: Refund recorded, email receipt dispatched, and audit log stored.
Core takeaway: An AI agent is not just a language model—it is a closed loop of planning, tool invocation, and environment feedback. Production systems require self-healing retries and strict human approval guardrails.
Kiểm tra khái niệm tương tác+10 Points
What is AI? Quiz

A route planner searches possible journeys using explicit rules. What does this illustrate about AI?

Xem gì tiếp theo

Watch for the September 9 preorder launch, the applicable currency and regional availability of the reported $2,899 price, and whether the $500 early-bird discount is offered consistently through DJI and authorized retailers. The planned Local Data Mode is also important: users should look for details about what functions remain available offline, how data is stored and whether disabling cameras or microphones limits cleaning features.

The immediate practical milestone is the reported preorder window from September 9 through September 30. Prospective buyers should verify the currency of the $2,899 price, the terms of the $500 discount, regional availability, warranty coverage and delivery timing when listings go live. EFTM’s report does not provide those details.

The Local Data Mode is expected later this year for ROMO 2 and the original ROMO, according to EFTM. Further documentation should clarify whether the mode disables cloud-dependent features, how firmware updates work offline and what happens to images, video, audio and maps. Independent reviews should also test the robot’s recognition of liquids, glass, mirrors and obstacles in real homes.

Hướng dẫn và câu hỏi liên quan

AI là gì?Đại lý AIĐạo đức AIKiểm tra những gì bạn biết — thử một bài kiểm tra AI miễn phíTra cứu một thuật ngữ AI trong bảng thuật ngữ của chúng tôiTheo dõi trình theo dõi phát hành mô hình AI
Tìm thấy điều này hữu ích?